Electric Cabinet Locks

The EL110 Cabinet lock is a small cast aluminium lock designed for cabinets having either swing or sliding doors where access control is a requirement and keys are not the total answer. The Cabinet Lock designed to hold 150kgs ( 330 lbs) can be mounted both vertically and horizontally.

The EL110 can be controlled by any existing access control system or simply controlled through a remote key pad or key switch and suitable for installations that have only one or multiple cabinet applications.

Features

• MODE CONVERSION Can be changed from "power to lock" to "power to open"
  

• FLEXIBLE ALIGNMENT Has a 5mm XY adjustment after installation
  

• LOW CURRENT CONSUMPTION Uses only 187mA with 12 volts dc

• INDUSTRY STANDARD Can be connected to any key switch, key pad, card reader or access control system
  
  
• MULTI VOLTAGE Available in both 12 and 24 volts dc
  
  
• CONTINUOUS RATED Solenoid can be continuously powered
  
  
• COMPLIANT
  
  
• Approval Electromagnetic Compatibility - EN500181 -1 Exempt
  
  
• 5 YEARS GUARANTEE

Technical Data

Electrical

• 12 volts dc current requirement 187mA. (Red coil wires bi-directional).
• 24 volts dc current requirement 87. Blue coil wires bi-directional).

General

• Holding force in all directions 150kgs (330 lbs)
• Product weight - 146gms ( 5.1 oz)
• Shipping weight in box - 165gms (5.8 oz)
• Shipping size in box - 115 x 45 x 37 /( 4 1/2" x 1 3/4" x 1 1/2")

Tender Statement for Specifiers

The lock which is to be surface mounted and constructed of cast aluminium as a minimum should be self latching when used in the power to open mode. The lock must be capable of being inter-changed from one mode to the other "on site" if required. Lock alignment must be adjustable up to 5mm ( 3/16") in both the "X" and "Y" directions both during and after installation.

Downloads

EL110 Technical Data

EL110 Brochure

EL110 Installation Instructions