Trimec Z Series Single Non Monitored Electromagnetic Locks Trimec Z Series Single Non Monitored Electromagnetic Locks Trimec Z Series Single Non Monitored Electromagnetic Locks The Single Series Electromagnetic Locks operate with holding forces from 250kg up to 580kg. Covering a range of applications the Z4 and Z8 Electromagnets are ideal for applications from Standard doors through to high use commercial swing doors. With fixing options including wood, aluminium and steel constructions, as well as glass door applications, the range caters to most electromagnetic needs. Key Features Fail-safe: unlocks when power is removed Easy installation: suitable for both new and retrofit usage High holding force: refer to the technical data overleaf Self-alignment: armature plate pivots to accommodate door drop Silent operation: no humming or buzzing Dual voltage: site selectable 12 or 24 Vdc Instantaneous Release: smart electronics on the Z Series Electromagnets eliminate residual magnetism Applications Aluminium doors Glass doors IT Storage rooms Access control Surface mount for inswing and outswing doors Standards and Compliance Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets) CE Approved C-Tick Certified Specification Z4 MagnetHolding Force 250kg - 280kgDimensions (L)238 x (H)48 x (D)27 mmVoltage 12Vdc/ 24Vdc ±10%Current 450mA @ (12Vdc) 225mA @ (24Vdc)Monitoring NoneOperating Temperature -10 to 55 DegreesOperating Humidity 0 - 95% Z8 MagnetHolding Force 550kg - 580kgDimensions (L)266 x (H)72 x (D)40 mmVoltage 12Vdc/ 24Vdc ±10%Current 512mA @ (12Vdc) 256mA @ (24Vdc)Monitoring NoneOperating Temperature -25 to 55 DegreesOperating Humidity 0 - 95% Specification StatementHolding force is measured directly between armature and magnet, holding force on the door may vary depending on the leverage created. The Single Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. In some cases the magnet armature plate pivots to accommodate door drop. The lock needs to be equipped with "smart electronics" that have zero residual magnetism, (instantaneous release). This is crucial for correct operation. Dimensions Z4 Electromagnetic Lock Z8 Electromagnetic Lock Close Documents | Downloads Electromagnetic Locking Solutions Catalogue Section.pdf (.pdf, 1.2 MB) Close Ordering Ordering Information Description Part Number Z4 Electromagnet - Non Monitored 770300-000T Z8 Electromagnet - Non Monitored 770600-000T Accessories Description Part Number Z2 L and Z Brackets 770150-901 Z4 L and Z Brackets 770300-901 Z8 Land Z Brackets 770600-901 Z4 Glass Door Brackets 770300-905 Z8 Glass Door Brackets 770600-905 Z4 PC BOARD (NON-MONITORED) 770300-914 Close Trimec Z Series Double Non Monitored Electromagnetic LocksHolding forces from 500kg to 1160kg. Trimec Z Series Double Monitored Electromagnetic LocksHolding forces from 500kg to 1160kg. Trimec Z Series Recessed Electromagnetic LocksHolding forces up to 280kg.