Trimec Z Series Double Monitored Electromagnetic Locks Trimec Z Series Double Monitored Electromagnetic Locks Trimec Z Series Double Monitored Electromagnetic Locks The Double Series Electromagnetic Locks operate with holding forces from 500kg up to 1160kg. Covering a range of applications these magnets are ideal for applications from access ways through to high use commercial swing doors. With fixing options including wood, aluminium and steel constructions, as well as glass door applications, the range caters to most electromagnetic needs. Key Features Fail-safe: unlocks when power is removed Easy installation: suitable for both new and retrofit usage High holding force: refer to the technical data overleaf Self-alignment: armature plate pivots to accommodate door drop Silent operation: no humming or buzzing Dual voltage: site selectable 12 or 24 Vdc Monitoring; Hall-Effect and Reed Switch monitoring on all models Instantaneous release: Smart electronics on the Z Series electromagnets eliminate residual magnetism. Applications Aluminium doors Double swing doors Access control Surface mount for inswing and outswing doors Monitoring Hall / Bond MonitoringThis indicates that the lock is powered and that the armature plate is in position and magnetically bonded (it monitors if the magnet is locked) Reed switch monitoringAn integrated reed switch monitors the door position separately (it monitors the position of the door) Standards and Compliance Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets) CE Approved C-Tick Certified Specification Z4 MagnetHolding Force 500kg - 560kgDimensions (L)476 x (H)48 x (D)27 mmVoltage 12Vdc/ 24Vdc ±10%Current 900mA @ 12Vdc 450mA @ 24VdcMonitoring Hall Effect / Bond sensing and Reed SwitchOperating Temperature -10 to 55 DegreesOperating Humidity 0 - 95% Z8 MagnetHolding Force 1100kg - 1160kgDimensions (L)532 x (H)72 x (D)40 mmVoltage 12Vdc/ 24Vdc ±10%Current 1024mA @ 12Vdc 512mA @ (12Vdc)Monitoring Hall Effect / Bond sensing and Reed SwitchOperating Temperature -10 to 55 DegreesOperating Humidity 0 - 95% Specification StatementThe Double Series Electromagnetic Lock should be constructed in an aluminium base with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. The lock needs to be equipped with "smart electronics" that have zero residual magnetism, (instantaneous release). This is crucial for correct operation. Dimensions Close Documents | Downloads Electromagnetic Locking Solutions Catalogue Section.pdf (.pdf, 1.2 MB) Close Ordering Ordering Information Description Part Number Z4 Double Electromagnet - Monitored 770300-112T Z8 Double Electromagnet - Monitored 770600-112T Accessories Description Part Number Z4D L and Z Brackets 770300-902 Z8D L and Z Brackets 770600-902 Z4 Glass Door Brackets 770300-905 Z8 Glass Door Brackets 770600-905 Z4 Armature Bracket Monitored 770300-910 Z8 Armature Bracket Monitored 770600-955 Z4 Screw Kit 770300-913 Z8 Screw Kit 770600-950 Z4 PC BOARD (MONITORED) 770300-915 Z8 PC BOARD (MONITORED) 770600-013 Close Trimec Z Series Single Monitored Electromagnetic LocksHolding forces from 250kg to 580kg. Trimec Z Series Double Non Monitored Electromagnetic LocksHolding forces from 500kg to 1160kg. Trimec Z Series Single Non Monitored Electromagnetic LocksHolding forces from 250kg up to 580kg.