Trimec ES6000 Hook Lock Trimec ES6000 Hook Lock Trimec ES6000 Hook Lock ES6000 Hook Lock is suitable for swinging doors, sliding doors and is easily attached to wood or steel door frames. ES6000 is heavy duty designed with its high preload (side load) capability of up to 300 kg, high holding force of up to 680 kg and up to 4 hour fire rating. Both Power to Open and Power to Lock models are available. The ES6000 is available in both recess and surface mounted versions. The ES6000 recess mounted version is completed with elegant satin stainless steel faceplate. The surface mounted version is completed with a cast aluminium cover that can be supplied in a variety of colours to match existing door frames. ES6000 can be mounted vertically and horizontally, with self-latching ability without power for fire applications. Features Power to Open or Power to Lock versions available Side Load (Pre-Load) Capable: Operates freely with up to 300 kg of side pressure Self Latching: Will self latch without power for fire applications 680kg holding force Robust Construction: Stainless steel components used Low Profile: Will protrude only 40mm into door headroom Multi Voltage: Automatic selection 12 to 30Vdc with back EMF protection and reverse polarity protection Multi Orientation: Can be mounted vertically or horizontally Low Current Consumption - 12VDC- 250mA after 1 sec. (initial current 830mA)- 24VDC- 140mA after 1 sec. (initial current 530mA) Monitored: locked and unlocked Tested to the 300kg preload capability Applications Heavy Duty applications Sliding and swing door applications High Air Pressure Environments (High Pre Load rating) Standards and Compliance Successfully fire rated up to 2hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets). CE Approved Approved to UL1034 (highest level) Specification VoltageSupply Voltage 12-30Vdc Ground (OV) Current12Vdc - 250 mA after 1 sec. (initial current 830 mA)24Vdc - 140 mA after 1 sec. (initial current 530 mA) MonitoringDoor locked (Solenoid) - Door Closed (Latch) Strength1500 lbs. (680kg) static strength rating70 foot-lbs. dynamic strength rating EnduranceInternal Testing achieved: 2,000,000 cycles of operation Pre-Load660lbs (300kg) pre-load capability EnvironmentOperational temperature range: -20°C to + 60°CLock BodyCast Aluminium Construction Lock BoltSolid Stainless Steel Construction Specification StatementThis lock must be able to operate with up to 300kg of preload pressure, with a holding force of 700kg. The lock must be multi voltage selection 12 - 30 Volts with back EMF protection for reverse polarity. Lock can be mounted both horizontally or vertically. The lock need to be subjected to vigorous testing and a minimum of 2,000,000 cycles need to be achieved. Close Documents | Downloads Electromechanical Bolts Catalogue Section.pdf (.pdf, 1.5 MB) ES6000 Installation.pdf (.pdf, 264 kB) Close Ordering Ordering Information Description Part Number ES6001SS Mortice, Hook Lock Monitored, 12 - 24V Fail Safe SS Faceplate (Recessed) 116001-000 ES6001SIL Surface, Hook Lock Monitored, 12 - 24V Fail Safe Silver Cover 116001-010 ES6002SS Mortice, Hook Lock Monitored, 12 - 24V Fail Secure SS Faceplate (Recessed) 116002-000 ES6002SIL Surface, Hook Lock Monitored, 12 - 24V Fail Secure Silver Cover 116002-010 Accessories Description Part Number Spare Cover for Hook Lock, Silver 206000-010 ES6000 ROLLER STRIKE ASSEMBLY 220600-503 Close Trimec ES8000 V-LockDoor misalignment of up to 3.5mm +/- Trimec ES8000 Glass Door BracketSelf adhesive holding force 900kg. Trimec ES8200 Technilock2500kg holding force.