Trimec ES100 Series Electric Strike Trimec ES100 Series Electric Strike Trimec ES100 Series Electric Strike The ES100 is a cost efficient robust electric strike with a solid construction of one-piece cast aluminium body and stainless steel striker. Having a deeper than normal strike-keeper area, ES100 is designed to work with an extensive range of locks and offers the same level of security and reliability usually provided by more expensive electric locking solutions. Extension lips are available to accommodate the installation of electric strikes on door frames with different thickness. The ES100 product range of patented electric strikes are suitable for use with all access control installations where flexibility, security and lower cost are required. Key Features All models IP56 Weather resistant Fail safe/fail secure changeable on site Stainless steel striker for extra strength and durability Stainless steel locking pins Multi Voltage 12Vdc & 24Vdc Optional mounting kit Installation template Suitable For 15mm latch with a 3mm door gap TRICARE® 5 Year Warranty Applications Exposed areas High traffic areas Open in/open out doors Suitable for use with all access control systems Standards and Compliance Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1.2005 (Part 1: Fire resistant door sets) Approved to UL1034 (highest level) CE Approved C-Tick Certified Weather Resistant (IP56) Specification Voltage12Vdc & 24Vdc Current250 mA @ 12Vdc - 125mA @ 24Vdc SolenoidSolenoids are rated for continuous use. MonitoringNone Holding Force680 kg Static Strength Rating EnduranceCycle tested to 1,000,000 operations EnvironmentOperational temperature range -20°C to + 60°CWeather resistant construction Standard. (IP56) BodyCast Aluminium Construction KeeperStainless SteelLatchSuitable for 15mm latchbolt with 3mm door gapSpecification StatementWhere Power to Lock and Power to Open functions may be required in the same building, the strike must be interchangeable from either "Power to Lock" or "Power to Open" on site. The electric strike should not consume current greater than 250 mA @ 12Vdc - 125mA @ 24Vdc and have a solenoid suitable for continuous use. Certifications must include CE, C-tick and 4hr fire rating. The strike should have a minimum holding force of 680kg, and an endurance rating of 1 million cycles. Dimensions Close Documents | Downloads ES100 ES110-221 - Installation Instructions.pdf (.pdf, 914 kB) Trimec Electric Strikes Catalogue Section.pdf (.pdf, 5.6 MB) Close Ordering Ordering Information Description Part Number ES101 12/24VDC PTL W/Res A-Type Rnd Cnr S/Steel F/Plate With Extension Lip Holes 110101-030M ES101 12/24VDC PTL W/Res A-Type Rnd Cnr S/Steel F/Plate Lipless 110101-070M Accessories Description Part Number 15mm Extension Lip (26mm total) 220110-502 25mm Extension Lip (36mm total) 220110-503 50mm Extension Lip (61mm total) 220110-504 Mounting Kit 220200-518 Note: For additional face plate options refer to catalogue. Faceplates Description Part Number A (ANSI Short) (Refer to catalogue) 210100-544 B (ANSI Long) (Refer to catalogue) 210100-530 J (Refer to catalogue) 210100-523 F (UK Sash RH) [DIN Left] (Refer to catalogue) 210100-528 G (UK Sash LH) [DIN Right] (Refer to catalogue) 210100-527 Note: All face plates are sold separately Close Trimec ES110 Series Electric StrikeFail safe/fail secure changeable on site. Trimec ES2000 Series Monitored Electric StrikeFail safe/fail secure changeable on site. Trimec ES150 Series Surface Mounted Electric StrikeFail safe/fail secure changeable on site.