Trimec ES2600 Series Monitored Electric Strike Trimec ES2600 Series Monitored Electric Strike Trimec ES2600 Series Monitored Electric Strike The ES2600 Series surface mounted electric strikes are high security products manufactured from solid stainless steel and designed to be used with existing and new panic bars fitted to emergency doors. When used in conjunction with a standard access control system, these strikes convert "Exit only" doors with "Pullman type" latches into a full access controlled door, thereby allowing authorised access from the secure side. The ES2600 series are fully monitored with both solenoid and latch/door monitoring functions & can be changed from fail safe to fail secure on site. Key Features Fail safe/fail secure changeable on site High security Available in 12 or 24Vdc 650kg holding force 1 million cycles endurance rating Body depth only 27mm Cast stainless steel body Low current consumption - max 175Ma @ 12Vdc Continuously rated solenoid Installation template Australian designed TRICARE® 5 Year Warranty Applications For use with panic bars Surface mount Egress doors Fire rated door sets Open out door sets Suitable for use with all access control systems Standards and Compliance Approved to UL1034 (highest level) CE Approved C-Tick Certified Specification Voltage12 or 24Vdc Current175mA @ 12Vdc - 88mA @ 24Vdc SolenoidsSolenoids rated for continuous use. MonitoringSolenoid Monitor - 1 amp NO/NC microswitchDoor / Latch Monitor - 1 amp NO/NC microswitch Holding Force650kg Static Strength Rating EnduranceCycle tested to 1,000,000 operations AdditionalAnti friction roller (patented)Suits panic bars with 15 to 20mm Pullman latch projection EnvironmentOperational temperature range - 20C to +60C BodySolid Stainless Steel Construction KeeperStainless SteelLatchSuitable for 15-20mm pullman latchSpecification StatementThe strike should be constructed of solid stainless steel, have a minimum holding force of 650kg and have an endurance rating of 1 million cycles. Maximum penetration into the door frame should not exceed 12mm. The one strike must be changeable from fail safe to fail secure on site where required. The strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include CE and C-Tick.Dimensions Close Documents | Downloads ES260 and ES2600 Installation Instructions.pdf (.pdf, 727 kB) Trimec Electric Strikes Catalogue Section.pdf (.pdf, 5.6 MB) Close Ordering Ordering Information Description Part Number 12V Fail Safe with Roller Keeper for Panic Bar 112601-000 Close Trimec ES3000 Series Monitored Electric StrikeFail safe/fail secure changeable on site. Trimec ES100 Series Electric StrikeFail safe/fail secure changeable on site. Trimec ES2000 Series Monitored Electric StrikeFail safe/fail secure changeable on site.