Trimec ES3000 Series Monitored Electric Strike Trimec ES3000 Series Monitored Electric Strike Trimec ES3000 Series Monitored Electric Strike The ES3000 series electric strikes are designed for high security applications and manufactured from solid stainless steel. These long ANSI strikes offer a strong dependable and long-lasting electric strike solution and are suitable for use with any access control system. These strikes are extremely flexible and can be changed from fail safe to fail secure and mounted on the left or right hand side of the door, thus reducing the amount of variants needed to cover each application. Key Features Fail safe/fail secure changeable on site Available in 12Vdc 850kg holding force 1 million cycles endurance rating Stainless Steel locking pins Continuously rated solenoid Optional mounting kit Australian designed TRICARE® 5 Year Warranty Applications Timber or metal doors Open in/open out doors Suitable for use with all access control systems Standards and Compliance Approved to UL1034 (highest level) CE Approved C-Tick Certified Specification Voltage12 or 24Vdc Current175mA @ 12Vdc - 88mA @ 24VdcSolenoidSolenoids rated for continuous use. MonitoringSolenoid Monitor - 1 amp NO/NC microswitchDoor / Latch - 1 amp NO/NC microswitch Holding Force850kg static strength rating EnduranceCycle tested to 1,000,000 operations EnvironmentOperational temperature range -20ºc to +60ºc BodySolid stainless steel construction KeeperStainless SteelLatchSuitable for 18mm latchbolt with 3mm door gap Specification StatementThe strike should be constructed of solid stainless steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. Monitoring must include independent door / latch& solenoid monitoring. The one strike must be changeable from fail safe to fail secure on site where required. The strike should not consume current greater than 175mA @ 12Vdc and have a solenoid rated for continuous use. Certifications must include CE and C-Tick.Dimensions Close Documents | Downloads Trimec Electric Strikes Catalogue Section.pdf (.pdf, 5.6 MB) Trimec ES3100 ES310-221 - 0515.pdf (.pdf, 1 MB) Close Ordering Ordering Information ES3000 Series - ANSI Extension LIP Description Part Number 12V Fail Safe Large Stainless Steel Faceplate 113101-000 ES3000 Series - Wide Extension LIP Description Part Number 12V Fail Safe Large Stainless Steel Faceplate (SEC) 113201-030 24V Fail Safe Large Stainless Steel Faceplate (SEC) 113203-030 Close Trimec ES2000 Series Monitored Electric StrikeFail safe/fail secure changeable on site. Trimec ES150 Series Surface Mounted Electric StrikeFail safe/fail secure changeable on site. Trimec ES300 Series Electric StrikeFail safe/fail secure changeable on site.